Rebuilding the Mounting the tension arm page in Elementor.
Mounting the tension arm
Just like the rolling guides, mounting the new tension arm is very easy to do, see below.
STEP 01
Step 1: The new tension arm and roller
The new tension arm and roller, as delivered.
Step 2: Attach hardware
The new arm attached to the OEM base and leaf spring.
Step 3: Mount on machine
The new rolling tension arm mounted on the machine.
Step 4: Thread tape
The same view, with tape threaded.
Close-up view of the mounted arm with tape.
Step 5: Final Check
Close-up view of the mounted arm with tape.